YXFiber Low-Speed Optical Modules: 100G and Below – We‘ve Got You Covered

Everyone’s chasing 800G and 1.6T these days. But we‘ve always focused on 100G and below.

It’s not that we can‘t do high-speed. We just believe low-speed deserves more serious attention.

The main players in 5G fronthaul are 10G and 25G. In enterprise networks, the biggest demand is 1G to 10G. Industrial and security applications are still heavily using 1G. Hundreds of millions of SFP ports are still running worldwide – and all of them need maintenance.

We make SFP modules, Fiber Optic Modules, SFP+, and optical modules – but mainly below 100G. We stay grounded and focus on doing low-speed right.

As an SFP+ optical transceiver company, we‘ve been in this space for over a decade.

I. YXFiber‘s Expertise in Low-Speed Modules

(1) Product Line – Complete Coverage

We cover everything from 155M to 100G.

155M, 1.25G, 2.5G – used in legacy equipment and industrial control.

1G SFP – used in enterprise networks, security surveillance, and storage networks.

10G SFP+ – used in enterprise upgrades, data centers, and 5G fronthaul.

25G SFP28 – the workhorse for 5G fronthaul today.

40G and 100G QSFP series – mainly used in data center aggregation layers.

(2) Core Technology – We Own It

DWDM – We cover 40 channels from C17 to C61, supporting 1.25G, 2.5G, and 10G with transmission distances from 10km to 100km. We use TEC-cooled laser technology with wavelength precision controlled at 100GHz.

BiDi single-fiber solution – One fiber handles both transmit and receive, saving half the fiber cores. Reach up to 80-100km. This solution is especially popular where fiber resources are tight.

Industrial wide-temperature – We offer products rated from -40°C to +85°C. Standard modules can‘t handle outdoor cabinets or industrial sites. Our industrial-grade modules run stable in extreme conditions.

Copper/Fiber modules – 1G and 10G RJ45 electrical interface modules supporting 100m transmission, covering everything from server rooms to desktops.

(3) Compatibility – Where We Put Extra Effort

During development, we test with major switch brands – Cisco, Huawei, H3C, ZTE, Juniper, HP – you name it. We pre-write all the required parameters into the firmware. Customers just plug and play – no time wasted tweaking compatibility.

(4) Quality – We Never Cut Corners

We have our own dust-free workshops and follow strict production procedures. Every single module goes through 15 manufacturing steps – from MATERIAL QUALITY TEST, CLIPPING PINS, WELDING, BURN-IN, SHAPING, SPECTRUM ANALYSIS, EYE DIAGRAM, TEMPERATURE TEST, FLOW METER TEST, TAGGING, CODING, COMPATIBILITY TEST, FACE INSPECTION, CLEANING, to PACKAGE – before it‘s approved for shipment. Not a single module leaves our facility without meeting our standards.

Each module comes with a certificate of conformity and a detailed test report – so our customers immediately see the quality they’re getting. Quality is the one thing YXFiber never compromises on.

(After-sales support: 3-year warranty, lifetime technical support.)

So here‘s what we’re trying to say:

YXFiber doesn‘t chase the high-speed race. Our home ground is 100G and below. We’ve been at this for over a decade – and we‘re not just going through the motions. Our goal is simple: the widest product range, the steadiest quality, the best compatibility, and the most reliable service.

In the world of optical modules, speed isn’t everything. Stability, comprehensive solutions, and peace of mind for our customers – these matter just as much. The low-speed segment deserves serious players who take it seriously.

From 155M to 100G, from duplex to BiDi, from commercial to industrial wide-temperature – we focus on one thing: doing low-speed optical modules right.

Below 100G, you can count on YXFiber.